'extruder'

1. Introduction of in Ahmadabad Fully Stretch Film Making Machine Stretch Film Making Machine mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on. Double layers PE Cast Film Machine Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc. Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film) Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc. Width to be produced: Min 20mm to max 1500mm. Thickness to be produced: 0.01mm-0.05mm 2. Use of Stretch Film Making Machine: 1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 3) Rotational twist: Rolling paper, carpet etc. 4) Binding: Glass container, acceptance etc. 5) Break-bulk packaging: Soybean, grain, plastic particle etc. 6) Storage packaging: Such as grass. 7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 8) Ring twist packaging: Type, wire, cable, steel silk etc. 3. Finished Products of Stretch Film Making Machine The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages of Stretch Film Making Machine: Good tensile strength Superior anti-pricking ability High transparency Good ductility and anti-impact strength Stable sticky sides etc. 4. Outstanding Features of Stretch Film Making Machine Higher output with stable quality stretch film, superior than the same suppliers more than 30%. Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output. Good water cooling effect and imported die steel to ensure making even and good ductility stretch film. Swing system installed to adjust the film thickness and evenness. The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly. PLC controlled, fully automatic. 5. Packaging Condition of Stretch Film Making Machine: 1) Packed fully with EPE foam, blanketry and stretch film. 2) Wire netting fastened at the bottom of the container. 6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Stretch Film Making Machine Automatic Casting. Stretch Film Making Machine

Extrusion Coating Lamination Plant An Extrusion Coating Lamination Plant is used to apply a thin layer of plastic onto a substrate material. The machine works by melting plastic pellets in an extruder and then extruding the molten plastic through a die, which shapes the plastic into a thin film. The film is then pressed onto the substrate material, which is fed through the machine. Here are the steps involved in the operation of an Extrusion Coating Lamination Plant: 1. The plastic pellets are fed into the extruder hopper, which is located at the top of the machine. 2. The pellets are then melted in the extruder, which is a heated cylinder with a screw inside that moves the plastic along the length of the cylinder. 3. The molten plastic is then pushed through a die, which shapes the plastic into a thin film. 4. The substrate material is fed through the machine on a roller. The film is pressed onto the substrate material with the help of a nip roller, which applies pressure to ensure the film adheres to the substrate. 5. The coated substrate material is then cooled using a cooling system, such as a series of water-cooled rollers. 6. The coated substrate material can then be wound up onto a roll for further processing. Overall, an Extrusion Coating Lamination Plant works by melting plastic pellets and extruding them through a die to create a thin film, which is then pressed onto a substrate material. The machine can be used for a variety of applications, such as coating paper or cardboard with plastic to make it more durable, or laminating multiple layers of plastic to create a barrier film. Extrusion Coating Lamination Plant

Plastic Recycling Machine with Die Face Cutter Plastic Recycling Machine with Die Face Cutter such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine. Plastic Recycling Machine with Die Face Cutter is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of plastic pollution. Plastic Recycling Machine with Die Face Cutter includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags. Another barrier to recycling is the widespread use of dyes, fillers , and other additives in plastics. The polymer is generally too viscous to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often. The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability. The use of biodegradable plastic is increasing. Other processes of Plastic Recycling Machine with Die Face Cutter:- A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification. Applications of Plastic Recycling Machine with Die Face Cutter:- PET Main article: Plastic Recycling Machine with Die Face Cutter Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET). RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale. One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation. Plastic Recycling Machine with Die Face Cutter

Mother Baby Plastic Recycling Machine Mother Baby Plastic Recycling Machine such as Plastic Reprocess Plant, Plastic Waste Recycling Plant, Plastic Recycling Machine, Raffia Waste Reprocess Plant, Extruder For Waste Plastic Recycling, Drinking Straw Machine. Mother Baby Plastic Recycling Machine is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of plastic pollution. Mother Baby Plastic Recycling Machine includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags. Another barrier to recycling is the widespread use of dyes, fillers , and other additives in plastics. The polymer is generally too viscous to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often. The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability. The use of biodegradable plastic is increasing. Other processes of Mother Baby Plastic Recycling Machine :- A process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel. There is also a possibility of mixed recycling of different plastics, which does not require their separation. It is called Compatibiization and requires use of special chemical bridging agents compatibilizers. It can help to keep the quality of recycled material and to skip often expensive and inefficient preliminary scanning of waste plastics streams and their separation/purification. Applications of Mother Baby Plastic Recycling Machine :- PET Main article: Mother Baby Plastic Recycling Machine Post-consumer Polyethylene (PET or PETE) containers are sorted into different color fractions, and baled for onward sale. Non-PET fractions such as caps and labels are removed during this process. The clean flake is dried. Further treatment can take place e.g. melt filtering and pelletizing or various treatments to produce food-contact-approved recycled PET (RPET). RPET has been widely used to produce polyester fibers. This sorted post-consumer PET waste is crushed, chopped into flakes, pressed into bales, and offered for sale. One use for this recycled PET that has recently started to become popular is to create fabrics to be used in the clothing industry. The fabrics are created by spinning the PET flakes into thread and yarn. This is done just as easily as creating polyester from brand new PET. The recycled PET thread or yarn can be used either alone or together with other fibers to create a very wide variety of fabrics. Traditionally these fabrics are used to create strong, durable, rough, products, such as jackets, coat, shoes, bags, hats, and accessories since they are usually too rough for direct skin contact and can cause irritation. Mother Baby Plastic Recycling Machine

PET Recycling Machine Leading Manufacturer of plastic granules making machines, waste plastic reprocessing plant, plastic recycling plant, Hips Plastic Recycling Machine, plastic recycling machine, recycling extruder and lumps gitty machine plant from Ahmedabad. We offer complete waste PET Recycling Machine for all type of scraps like batteries, moulded items all hard plastics as well as soft film grades like polythene bags, tarpaulin, cement raffia bags. We make washing machine, drier, grinder, agglo mixer, extruders, tank, cutters etc. vented extruders, two stage extruders, face cutters, auto loaders etc. We have machines for 50 to 700 kgs per hour output for HM, LD, PP, PET, HDPE, ABS, LDPE, HIPS, NYLON We provide a wide range of PET Recycling Machine depending on customer''s requirements like Size , Production capacity , type of material to be recycled etc. Features of PET Recycling Machine: Excellent functionality Hassle free performance Longer service life Application of PET Recycling Machine:- LD, PP, HM, LDPE, ABS, HIPS, PET, Nylon

Plastic Recycling Machine Leading Manufacturer of plastic granules making machines, waste plastic reprocessing plant, plastic recycling plant, Hips Plastic Recycling Machine, plastic recycling machine, recycling extruder and lumps gitty machine plant from Ahmedabad. We offer complete waste Plastic Recycling Machine for all type of scraps like batteries, moulded items all hard plastics as well as soft film grades like polythene bags, tarpaulin, cement raffia bags. We make washing machine, drier, grinder, agglo mixer, extruders, tank, cutters etc. vented extruders, two stage extruders, face cutters, auto loaders etc. We have machines for 50 to 700 kgs per hour output for HM, LD, PP, PET, HDPE, ABS, LDPE, HIPS, NYLON We provide a wide range of Plastic Recycling Machine depending on customer''s requirements like Size , Production capacity , type of material to be recycled etc. Features of Plastic Recycling Machine: Excellent functionality Hassle free performance Longer service life Application of Plastic Recycling Machine:- LD, PP, HM, LDPE, ABS, HIPS, PET, Nylon

Paper Coating and Lamination Machine An Paper Coating and Lamination Machine is used to apply a thin layer of plastic onto a substrate material. The machine works by melting plastic pellets in an extruder and then extruding the molten plastic through a die, which shapes the plastic into a thin film. The film is then pressed onto the substrate material, which is fed through the machine. Here are the steps involved in the operation of an Paper Coating and Lamination Machine: 1. The plastic pellets are fed into the extruder hopper, which is located at the top of the machine. 2. The pellets are then melted in the extruder, which is a heated cylinder with a screw inside that moves the plastic along the length of the cylinder. 3. The molten plastic is then pushed through a die, which shapes the plastic into a thin film. 4. The substrate material is fed through the machine on a roller. The film is pressed onto the substrate material with the help of a nip roller, which applies pressure to ensure the film adheres to the substrate. 5. The coated substrate material is then cooled using a cooling system, such as a series of water-cooled rollers. 6. The coated substrate material can then be wound up onto a roll for further processing. Overall, an Paper Coating and Lamination Machine works by melting plastic pellets and extruding them through a die to create a thin film, which is then pressed onto a substrate material. The machine can be used for a variety of applications, such as coating paper or cardboard with plastic to make it more durable, or laminating multiple layers of plastic to create a barrier film. Paper Coating and Lamination Machine

Tendum Coating Lamination Machine An extrusion coating lamination machine is used to apply a thin layer of plastic onto a substrate material. The machine works by melting plastic pellets in an extruder and then extruding the molten plastic through a die, which shapes the plastic into a thin film. The film is then pressed onto the substrate material, which is fed through the machine. Here are the steps involved in the operation of an extrusion coating lamination machine: 1. The plastic pellets are fed into the extruder hopper, which is located at the top of the machine. 2. The pellets are then melted in the extruder, which is a heated cylinder with a screw inside that moves the plastic along the length of the cylinder. 3. The molten plastic is then pushed through a die, which shapes the plastic into a thin film. 4. The substrate material is fed through the machine on a roller. The film is pressed onto the substrate material with the help of a nip roller, which applies pressure to ensure the film adheres to the substrate. 5. The coated substrate material is then cooled using a cooling system, such as a series of water-cooled rollers. 6. The coated substrate material can then be wound up onto a roll for further processing. Overall, an extrusion coating lamination machine works by melting plastic pellets and extruding them through a die to create a thin film, which is then pressed onto a substrate material. The machine can be used for a variety of applications, such as coating paper or cardboard with plastic to make it more durable, or laminating multiple layers of plastic to create a barrier film.